CRANKCASE PRESSURE LEAK DOWN TESTER 2-STROKE MOTION PRO 08-0071

Motion Pro 2-Stroke Crankcase Leak Down Tester

Detect air leaks in 2-stroke engines with the Motion Pro 2-Stroke Crankcase Leak Down Tester. Proper pressure testing is crucial for maintaining optimal engine performance and preventing damage. Air leaks can lead to a lean fuel-air mixture, causing engine overheating, piston seizure, and detonation.

Key Features:

• Detects air leaks in 2-stroke engines.
• Includes an air pressure gauge and pump-up bulb.
• Comes with various fittings and adaptors suitable for most single and twin-cylinder 2-stroke motorcycle engines.
• Intake adaptors available in sizes: 35mm, 41mm, 43mm, and 46mm.
• Expandable rubber exhaust port plugs fit round ports from 35mm to 60mm in diameter.
• Conveniently packed in a carry box with detailed instructions.
• Made in the USA.

Important Safety Note: Always wear eye protection to prevent injury from escaping gas or flying particles. It is recommended that this procedure be performed by a qualified mechanic in a properly equipped shop.

Testing Procedure Highlights:

• Ensure cylinder, head, reed cage, intake manifold, and spark plug are installed and torqued correctly. Remove exhaust pipe and carburetor.
• Seal exhaust ports using appropriate rubber expansion plugs or metal plates.
• Insert the correct carburetor adaptor into the intake manifold.
• Pump air pressure into the engine to 6 PSI. Never exceed 8 PSI.
• If pressure is lost, use soapy water to locate leaks and repair as needed. A leakage rate of 1 PSI per minute is acceptable; lower rates yield better performance.
• Listen for leaks at various points, including crankcase seals and power valve areas.