FLY WHEEL PULLER 55mm x 1mm
FLY WHEEL PULLER 55mm x 1mm RH. Designed for Ducati 200/250/350 and most narrow-case bevel single models. Features a hard black oxide finish and a replaceable brass bushing at the contact point, fitting later wide-case machines. Specifications include HOLDER O.D.: 62MM, Thread I.D.: 55mm, LENGTH: 79MM. The bolt is 1/2 X 12UNC with a length of 93MM and a side-to-side measurement of 19MM. Always check your motor's thread size before ordering. For optimal use, ensure the flywheel thread is clean and undamaged, apply copper grease to the puller threads, and fully screw the puller into the flywheel. A tap with a hammer on the center may be needed to jolt it free. When using old pullers, confirm threads are in good condition to prevent flywheel damage. Cross Reference Numbers: UP-12231-1, 88713-0250.
- SKU
- 00-0093.FIR
- Brand
- Factory Image Racing
- Availability
- In Stock (116)
FULL DESCRIPTION
Flywheel Puller 55mm x 1mm RH
This professional flywheel puller is an essential tool for removing the flywheel on specific Ducati models. Designed for ease of use and durability, it ensures proper removal without damaging your motorcycle's components.
Key Features:
- Thread Size: 55mm x 1mm Right Hand
- Holder Outer Diameter: 62mm
- Overall Length: 79mm
- Bolt Size: 1/2 X 12 UNC
- Bolt Length: 93mm
- Bolt Side to Side Measurement: 19mm
- Finish: Hard black oxide finish for corrosion resistance
- Design Improvement: Features a replaceable brass bushing at the contact point for enhanced longevity and compatibility with later wide-case machines.
Usage Tips:
- Ensure the flywheel thread is clean and undamaged before inserting the puller.
- Apply copper grease to the puller threads to prolong its life and ensure smooth operation.
- Verify that the puller is fully screwed into the flywheel.
- A light tap with a hammer on the center may be required to jolt the flywheel free.
- If using older pullers, always inspect threads for damage before use to prevent harm to the flywheel.
Please confirm your motor's thread size before ordering.
This tool is recommended for owners of Ducati singles to ensure proper flywheel removal.
