PRESSURE WASHER POLAR BLAST SNOW FOAM 2.5L AUTOGLYM PB002.5
Autoglym Polar Blast Snow Foam 2.5L. A rich snow foam applied using a pressure washer or foam gun as a pre-wash stage. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling prior to shampooing. This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination. Polar Blast can be used instead of a shampoo as long as the vehicle isn't heavily soiled, just be sure to rinse the vehicle with water first to remove the top layer of dirt. Its pH neutral formulation will not remove any existing layers of polish or wax. Recommended dilution is 100ml product to 500ml water in your foaming bottle. Spray onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels. Leave to dwell for up to 10 minutes, but do not allow to dry on. Finally, rinse thoroughly from the bottom up.
- SKU
- 01-629.AG
- Brand
- Auto Glym
- Availability
- In Stock (5)
FULL DESCRIPTION
Autoglym Polar Blast Snow Foam 2.5L
Autoglym Polar Blast is a premium snow foam designed for the pre-wash stage of vehicle cleaning. Available in a generous 2.5 litre container, this powerful formula creates a thick, clinging foam that adheres to your vehicle's paintwork.
This rich foam effectively loosens and lifts surface dirt, grime, and heavy soiling before you even touch the vehicle with a wash mitt or sponge. By encapsulating dirt, Polar Blast significantly reduces the risk of scratching and swirling your paintwork during the washing process.
For lightly soiled vehicles, Polar Blast can even serve as a shampoo substitute. Simply rinse the vehicle with water first to remove the initial layer of loose dirt, then apply the foam.
Key Features:
- Creates a rich, clinging snow foam.
- Ideal for pre-wash to lift dirt and grime.
- Reduces the risk of scratches and swirl marks.
- pH neutral formula that will not strip existing wax or polish.
- Suitable for use with pressure washers or foam guns.
- Can be used as a shampoo for lightly soiled vehicles.
How to Use:
- Ensure the vehicle's bodywork and wheels are cool to the touch and not in direct sunlight.
- Dilute Polar Blast according to your desired foam density. A common starting point is 100ml of product mixed with 500ml of water in your foaming bottle. Adjust foam gun settings as needed.
- Apply the foam evenly over the entire vehicle, starting from the bottom and working upwards. Ensure all exterior surfaces, including glass and wheels, are covered.
- Allow the foam to dwell on the surface for up to 10 minutes to loosen dirt. Do not let the foam dry on the paintwork.
- Rinse the vehicle thoroughly with water, again working from the bottom upwards.