ENGINE FLUSH 250ML LIQUI MOLY - 1657
Liqui Moly Engine Flush 250ml is a cleaning fluid designed to remove deposits and contaminants from the oil circuits of four-stroke motorcycle engines. It dissolves sludge and lacquer formers, suspending both oil-soluble and oil-insoluble residues, which are then removed during the subsequent oil change. This process restores the engine's original performance and ensures the fresh oil can operate under optimal conditions. The product effectively cleans internal engine components by dissolving sludge and lacquer deposits, and suspends contaminants for removal during oil change. It is compatible with catalytic converters, safe for use with wet clutches, and neutral to common sealing materials. Application involves adding 250ml to warm engine oil before oil change (sufficient for up to 4.5 litres of oil), allowing the engine to idle for approximately 10 minutes, operating the clutch lever several times for manual transmissions, and then proceeding with the oil and filter change. Compatible with all commercially available motor oils. Volume: 250ml. Form: Liquid. Base: Additive, carrier liquid. Viscosity at 40°C: 24.12mm²/s. Flash Point: 61°C. Pour Point: -45°C. Density at 20°C: 0.805g/cm³.
- SKU
- LM-1657
- Brand
- Liqui Moly
- Availability
- In Stock (6)
FULL DESCRIPTION
Liqui Moly Motorbike Engine Flush 250ml
Restore your four-stroke motorcycle engine's peak performance with Liqui Moly Motorbike Engine Flush. This advanced cleaning fluid is specifically formulated to tackle stubborn deposits and contaminants within the engine's oil circuits. It works by dissolving harmful sludge and lacquer formers, creating a stable suspension of both oil-soluble and oil-insoluble residues. These impurities are then effectively removed during your next oil change, ensuring your fresh oil can operate in a pristine environment.
Key Features:
- Thoroughly cleans internal engine parts by dissolving sludge and lacquer buildup.
- Keeps contaminants suspended for easy removal during the oil change process.
- Safe for use with catalytic converters.
- Compatible with wet clutches, ensuring smooth operation.
- Does not react with common sealing materials, protecting your engine.
- Straightforward and easy application.
- Designed for 250ml dosage.
Technical Specifications:
- Form: Liquid
- Base: Additive, carrier liquid
- Viscosity at 40°C: 24.12 mm²/s
- Flash Point: 61 °C
- Pour Point: -45 °C
- Density at 20 °C: 0.805 g/cm³
How to Use:
- Add the 250ml contents to your warm engine oil prior to performing an oil change. This quantity is sufficient for engine oil capacities up to 4.5 litres.
- Let the engine run at idle for approximately 10 minutes.
- If your motorcycle has a manual transmission, operate the clutch lever several times, holding it for a few seconds during each operation.
- After the idling period, proceed with changing the engine oil and oil filter.
- This product is compatible with all standard commercial motor oils.